1G8DC18H6BF1***** VIN lookup for 1981 CHEVROLET BLAZER (1G8DC18H6BF130657)
1G8DC18H6BF130657 VIN is assigned
to 1981 CHEVROLET BLAZER .
It is a PASSENGER CAR .
It was manufactured by GENERAL MOTORS LLC.
This 1981 BLAZER is a
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV).
| Vehicle Descriptor | 1G8DC18H*BF |
| Make | CHEVROLET |
| Manufacturer Name | GENERAL MOTORS LLC |
| Model | Blazer |
| Model Year | 1981 |
| Plant City | FLINT |
| Series | Conventional Cab |
| Trim | 1/2 ton |
| Vehicle Type | PASSENGER CAR |
| Plant Country | UNITED STATES (USA) |
| Plant Company Name | Flint Truck Assembly |
| Plant State | MICHIGAN |
| body Image Id | 7 |
| Body Class | Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV) |
| Doors | 2 |
| Gross Vehicle Weight Rating From | Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg) |
| Bed Type | Not Applicable |
| Cab Type | Not Applicable |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Drive Type | 4x2 |
| Brake System Type | Hydraulic |
| Engine Numberof Cylinders | 8 |
| Displacement(CC) | 5000.0 |
| Displacement(CI) | 305.11872047366 |
| Displacement(L) | 5.0 |
| Engine Model | 4BBL |
| Fuel Type- Primary | Gasoline |
| Engine Configuration | V-Shaped |
| Engine Manufacturer | Chevrolet |
| NCSA Body Type | Compact Utility (Utility Vehicle Categories "Small" and "Midsize") |
| NCSA Make | Chevrolet |
| NCSA Model | S-10 Blazer/TrailBlazer (2002 only; for 2003 on, see 403) |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
March 23 , 2006 NHTSA Campaign Number: 06E026000
EXTERIOR LIGHTING
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
Manufacturer: PRO-A MOTORS, INC.
Components: EXTERIOR LIGHTING
Potential Number of Units Affected: 61,944
Description:
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Remedy:
PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
Notes:
THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED "LAMP MODEL NUMBERS."CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
November 14 , 1980 NHTSA Campaign Number: 80V150000
SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Manufacturer: GENERAL MOTORS CORP.
Components: SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected: 364
Description:
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITHOUT THE RETAINER CLIP FOR THE BRAKE PEDAL PUSH ROD. THE ABSENCE OF THIS RETAINER CLIP COULD ALLOW THE BRAKE PEDAL TO DISENGAGE FROM THE MASTER CYCLINDER PUSH ROD.
Remedy:
THE DEALER WILL INSPECT AND, IF NECESSARY, INSTALL THE RETAINER CLIP ON ALL SUSPECT VEHICLES WITHOUT CHARGE.
Notes:
VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: SERVICE BRAKES; BRAKE PEDAL PUSH ROD RETAINER CLIPS.CONSEQUENCES OF DEFECT: THIS MAY RESULT IN LOSS OF BRAKING ACTION. THISCONDITION COULD OCCUR WITHOUT WARNING WHILE THE VEHICLE IS IN MOTION, AND COULDRESULT IN AN ACCIDENT.
October 24 , 2007 NHTSA Campaign Number: 07E088000
EQUIPMENT
THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
Manufacturer: HONEYWELL INTERNATIONAL, INC.
Components: EQUIPMENT
Potential Number of Units Affected: 121,680
Description:
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
Remedy:
HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
Notes:
CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Rating:
4.71 from 5
(4291 reviews)