1G1AP87H6BN1***** VIN lookup for 1981 CHEVROLET CAMARO (1G1AP87H6BN128591)
1G1AP87H6BN128591 VIN is assigned
to 1981 CHEVROLET CAMARO with a .
It is a PASSENGER CAR .
It was manufactured by GENERAL MOTORS LLC.
This 1981 CAMARO is a
Coupe.
| Vehicle Descriptor | 1G1AP87H*BN |
| Make | CHEVROLET |
| Manufacturer Name | GENERAL MOTORS LLC |
| Model | Camaro |
| Model Year | 1981 |
| Plant City | NORWOOD |
| Series | Sport |
| Vehicle Type | PASSENGER CAR |
| Plant Country | UNITED STATES (USA) |
| Plant State | OHIO |
| body Image Id | 3 |
| Body Class | Coupe |
| Doors | 2 |
| Gross Vehicle Weight Rating From | Class 1: 6,000 lb or less (2,722 kg or less) |
| Gross Vehicle Weight Rating To | Class 1: 6,000 lb or less (2,722 kg or less) |
| Bed Type | Not Applicable |
| Cab Type | Not Applicable |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Engine Numberof Cylinders | 8 |
| Displacement(CC) | 5000 |
| Displacement(CI) | 305.1187204736 |
| Displacement(L) | 5 |
| Fuel Type- Primary | Gasoline |
| Engine Configuration | V-Shaped |
| Engine Manufacturer | Chevrolet |
| Seat Belt Type | Manual |
| NCSA Body Type | 2-door sedan,hardtop,coupe |
| NCSA Make | Chevrolet |
| NCSA Model | Camaro |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
May 19 , 1981 NHTSA Campaign Number: 81V060000
SEAT BELTS:FRONT:RETRACTOR
Manufacturer: GENERAL MOTORS CORP.
Components: SEAT BELTS
Potential Number of Units Affected: 55,238
Description:
ON CERTAIN VEHICLES, THE SEAT BELT RETRACTORS IN THE REAR SEATING POSITIONS CONTAIN FIRST LOCK POSITIONS WHICH WILL NOT LOCK WHEN USED BY SMALLER PASSENGERS. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION".
Remedy:
ALL OWNERS WILL BE SENT A PRE-PAID POSTAGE CARD THAT IS TO BE FILLED OUT AND SENT BACK. THE CARD WILL INDICATE WHETHER THE SEAT BELTS ARE FUNCTIONING PROPERLY. IF DEALER INSPECTS SEAT BELTS, THE SEAT BELT RETRACTORS WILL BE REPLACED, IF NECESSARY, WITHOUT CHARGE.
Notes:
VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: INTERIOR; SEAT BELT RETRACTORS.CONSEQUENCES OF DEFECT: IN THE EVENT OF A COLLISION, IF PASSENGERS ARE NOTSECURELY RESTRAINED, THE POSSIBILITY OF PERSONAL INJURY AND DEATH WOULD BEINCREASED.
October 24 , 2007 NHTSA Campaign Number: 07E088000
EQUIPMENT
THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
Manufacturer: HONEYWELL INTERNATIONAL, INC.
Components: EQUIPMENT
Potential Number of Units Affected: 121,680
Description:
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
Remedy:
HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
Notes:
CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Rating:
4.71 from 5
(4291 reviews)