1G1JC5448P73***** VIN lookup for 1993 CHEVROLET CAVALIER (1G1JC5448P7336303)
1G1JC5448P7336303 VIN is assigned
to 1993 CHEVROLET CAVALIER with a .
It is a PASSENGER CAR .
It was manufactured by GENERAL MOTORS LLC.
This 1993 CAVALIER is a
Sedan/Saloon.
| Vehicle Descriptor | 1G1JC544*P7 |
| Make | CHEVROLET |
| Manufacturer Name | GENERAL MOTORS LLC |
| Model | Cavalier |
| Model Year | 1993 |
| Plant City | LORDSTOWN |
| Series | Convertible & Wagon |
| Vehicle Type | PASSENGER CAR |
| Plant Country | UNITED STATES (USA) |
| Plant Company Name | Lordstown Assembly |
| Plant State | OHIO |
| body Image Id | 13 |
| Body Class | Sedan/Saloon |
| Doors | 4 |
| Windows | 4 |
| Bed Type | Not Applicable |
| Cab Type | Not Applicable |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Engine Numberof Cylinders | 4 |
| Displacement(CC) | 2200.0 |
| Displacement(CI) | 134.25223700841 |
| Displacement(L) | 2.2 |
| Fuel Type- Primary | Gasoline |
| Engine Configuration | In-Line |
| Fuel Delivery/ Fuel Injection Type | Multipoint Fuel Injection (MPFI) |
| Engine Manufacturer | Lansing |
| Seat Belt Type | Automatic |
| NCSA Body Type | 4-door sedan, hardtop |
| NCSA Make | Chevrolet |
| NCSA Model | Cavalier |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
January 23 , 1996 NHTSA Campaign Number: 96I001000
ELECTRICAL SYSTEM:HORN
THE HORN PAD CAN SEPARATE FROM THE STEERING WHEEL FALLING BETWEEN THE STEERING WHEEL SPOKES. THE HORN PAD COULD BECOME JAMMED BETWEEN THE STEERING WHEEL SPOKES AND THE TURN SIGNAL LEVER, RESULTING IN DAMAGE TO THE TURN SIGNAL LEVER, HORN PAD, AND HORN WIRING.
Manufacturer: GENERAL MOTORS CORP.
Components: ELECTRICAL SYSTEM
Potential Number of Units Affected: 417,000
Description:
THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH FEDERAL REGULATION 573. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. THESE VEHICLES WERE BUILT WITH INSUFFICIENT RETENTION OF THE HORN PAD.
Remedy:
DEALERS WILL MODIFY THE HORN PAD RETENTION CLIPS, INSTALL HORN PAD RETENTION BRACKETS TO THE STEERING WHEEL, REINSTALL THE HORN PAD AND ASSURE THAT THE HORN PAD IS PROPERLY RETAINED.
Notes:
NOTE:GENERAL MOTORS HAS DECIDED TO CONDUCT A SAFETY IMPROVEMENT CAMPAIGN TO MODIFY THE HORN PAD ON THESE VEHICLES.OWNERS CAN CONTACT CHEVROLET AT 1-800-222-1020.
July 21 , 1993 NHTSA Campaign Number: 93V121000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
THE IMPROPERLY MANUFACTURED BRAKE HOSES CAN CAUSEREDUCED BRAKE EFFECTIVENESS AND/OR UNEVEN BRAKING, WHICH COULD RESULT IN ANACCIDENT.
Manufacturer: GENERAL MOTORS CORP.
Components: SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected: 2,848
Description:
THE BRAKE HOSES WERE MANUFACTURED INCORRECTLY, AND DO NOT COMPLY WITH FMVSS 106, "BRAKE HOSES."
Remedy:
REPLACE THE RIGHT FRONT BRAKE HOSE ASSEMBLY ON CIERA AND CENTURY MODELS, AND BOTH REAR BRAKE HOSES ON CAVALIER AND SUNBIRD MODELS.
Notes:
SYSTEM: BRAKES; HYDRAULIC; HOSE.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED SERVICEDATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME WITHOUT CHARGE ORTHE REMEDY DOES NOT CORRECT THE SAFETY-RELATED DEFECT OR NONCOMPLIANCE, PLEASECONTACT THE APPROPRIATE SERVICE CENTER ( BUICK AT 1-800-458-8006, PONTIAC AT1-800-763-2737; OLDSMOBILE AT 1-800-442-6537; OR CHEVROLET AT 1-800-222-1020 ).ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETYHOTLINE AT 1-800-424-9393.
Rating:
4.71 from 5
(4291 reviews)